Fencing Panels - Hit & Miss Vertical

Vertical Hit and Miss Fence Panels

Hit and Miss fencing is so called because the pales or boards are alternately fixed on the front and the back of the fence panel inturn, they over-lap and create a hit and miss pattern. This also means that both you and your neighbour have a goodlooking side of the fence, as both sides are the same.

• Designed for use with slotted Jakposts
• Panels have a profiled timber frame mitred at the corner - not just nailed slats
• Hit and Miss panels’ design allows some wind to pass through - less wind resistant fencing
• All fixings are stainless steel
• Matching gates available by clicking here
• All timber is planed all round

Try Our FencebuilderHelp price and build your fence.

Also known as Ventilation Panels

Specification
Panels are 1.83m wide, framing 45 x 50mm, recessed to take boards, boards 95x8mm with internal battens 50 x 12mm. Jakcure finish ready for priming, or staining. If colour finishes are required we recommend that they be applied after the fence panels are erected.

More on Hit and Miss Gates

More on Fencing Panels

Preview	Product Code	Product	Price exc. V.A.T.	Quantity	Add to Basket
	634000	1.83m High x 1.83m Wide Hit & Miss Panel P.A.R. (Jakcured) #	£70.90
	634100	1.52m High x 1.83m Wide Vertical Hit & Miss Panel (Jakcured) #	£60.95
	634200	1.22m High x 1.83m Wide Vertical Hit & Miss Panel (Jakcured) #	£51.25
	634300	0.91m High x 1.83m Wide Vertical Hit & Miss Panel (Jakcured) #	£42.15